五月丁香六月麻豆|女人久久久久久久|52成人国产免费|激情桃色综合无码|亚洲人精品干干干|人妻中文字幕有码|亚洲永久精品无码|91综合亚洲有码精品福利日韩国产|97秋霞国产精伦影视|制服丝袜秘书无码视频

a.Cut off protective films for 5 to 10mm before inserting PC sheets to the support frame, because the protective films would cause inefficient adhesive between tamping and PC sheets.
b.Since the expansion and contraction degree of PC sheets, are different from that of medal frames, as well as PC sheets are flexible and taking air pressure, therefore, appropriate insertion, reserving space for expansion and shrink because of temperature changes, and choosing suitable thickness of PC sheets are necessary.General plate should be inserted into fixed frame for over 25mm, with at least 2 ribs installed into the fixed zone. 3mm place will be reserved for expansion or shrinkage. (Expansion ratio: 0.065mm/m)

(2)Screw installation

a. When hollow profile and solid sheet are installed with screw installation, all rivet holes should be reamed to reserve space for expansion and contraction. Usually, the holes should be larger than that of the bolt or rivet stems by 50%" so as to avoid expansion or shrinkage. 
b. Fill up the holes, and cover the exposed portion with silicone compound to prevent detergents permeating which brings damage to pc sheets, and avoid gradual cracks.
c. Rivet heads should be larger than the stems by 2 times. Use gaskets or washers to avoid the rivet heads touching pc sheets, and reduce the pressure.
d. Do not screw into too tightly.
e. Do not use gaskets made of PVC.
f. The bending part should be avoided using screw for cold bending process.